DAITEM SH195AX, Руководство по установке

Страница: 14 / 26

GB
104
Depending on the room and/or pet, the fixing height (measured
from the centre of the detector lens) can be adjusted. When the
detector is not fixed at a height of 2.2 m from the ground, the limit
between the detection zone and the non-detection zone can vary.
Detection zone for pets weighing less
than 6 kg
Detection zone for pets weighing more
than 6 kg
pets must not enter this zone pets are allowed to enter this zone
Detection zones
for pet-tolerant detector SH196AX
1.
Position the
back-plate on
the wall in the
chosen
location, mark
the position of
the screws and
drill the holes in
the wall.
2. Insert a long-
stemmed screw
via the rear of
the back-plate
and fix the
back-plate.
3. Position the
back-plate
cover.
4.
Assemble the two parts of the swivel bracket.
5. Insert the assembled swivel bracket into the long-stemmed screw.
6.
Position the motion detector base.
7.
Tighten the locking screw just enough to be still able to adjust detector
orientation.
8. Position the motion detector on its base and point it in roughly the right
direction.
9.
Retighten the locking screw.
Mount accessories
in this order
5.2 Fixing the device in place
Pozidriv 1
back-plate cover
screw +
tightening
washer
swivel bracket
long-
stemmed
screw
back-plate
base