DAITEM ALARM SYSTEM AND DIALLER, Руководство пользователя, Страница: 6 / 40

6
The control panel is factory programmed to prevent system arming in case a door or window (with a protection device
installed on it) has been left open.
This factory programming can be modified by the installer.
1.7 Arming the system when a door or window is open
Example: arming with exit 2 open
You arm the system You close exit 2 You arm the system End of exit time delay
The control panel does
not arm the system
“bip, exit 2
opened”
“bip, armed” “bip, armed”
The LED indicating
the reading zone flashes.
Hold the tag against
the pictogram
.
1.6 Arming the system in presence mode
Armed Presence: Group 1 only armed
“bip, Armed
Presence”
• Using a control keypad:
+
and
master code
• Using a vocal keypad with tag reader::
Group disarmed
Group armed
The control panel allows for partial protection and quiet system responses in the event of intrusion: Armed Presence.
IMPORTANT: there is no exit time delay or entry time delay in armed presence mode.
ENTRY TIME DELAY
The entry time delay is the time allowed to disarm the system from inside the premises (e.g. using the keypad) without triggering
the alerts and deterrents. Users can decide on the most suitable time delay for them with their installer.
A vocal warning
“BIP, BIP, BIP, BIP, PROTECTION_ACTIVE” tells users to disarm the system.
EXIT TIME DELAY
The exit time delay is the time allowed to leave the premises without triggering the alarm system. Users can decide on the most
suitable time delay for them with their installer. The end of this time delay is indicated by the control panel as it repeats the voice
message that the system is armed.
“bip, Armed
Presence”