DAITEM ALARM SYSTEM AND DIALLER, Руководство пользователя, Страница: 23 / 40

23
2.6 Recording or modifying the personalised welcome message
for vocal transmissions
PSTN
GSM
IMPORTANT: it is advisable to speak in front of the microphone.
DIALLER DIALLER
The personalised voice message (lasting 10 seconds maximum) allows correspondents to identify the dialler having triggered
the call.
To record the message, enter:
Example of personalised voice message
• Enter:
“message recording” “message playback”
“you are through to the
dialler of Mr Smith”
“you are through to the
dialler of Mr Smith”
2.7 Modifying the numbers of your individual correspondents (PSTN-GSM)
Your installer will have already programmed for you the telephone numbers of your correspondents for calls to individuals.
This programming only allows numbers that have already been programmed for calls to individuals to be modified in user
mode. It is not possible to check or delete them.
To modify the correspondent number programmed for calls to individuals, enter:
...
green LED lit:
start recording
x
speak in front of
the microphone
master code
master code
master code
New telephone n°
(20 digits max.)
• Cycle 1:
1: 1 st number
2: 2 nd number
3: 3 rd number
• Cycle 2:
4: 4
th
number
5: 5 th number
• Cycle 3:
6: 6 th number
7: 7 th number
8: 8 th number
• System correspondent:
9: 9
th
number (GSM only)
Add 00 in front of
foreign numbers.
IMPORTANT: this operation does not allow you to completely programme telephone numbers for calls to individuals and a
remote monitoring centre (SMS/PSTN protocol, listen-in, etc.). Contact your installer for this if necessary.
“bip + n°”
DIALLER
PSTN
GSM