DAITEM ALARM SYSTEM AND DIALLER, Руководство пользователя, Страница: 25 / 40

25
3.2 Procedure for voice calls to individuals
: press on the telephone handset during the listen-in period when you want to stop listen-in and end the call.
(1) Voice call to an individual with automatic listen-in if this has been programmed (for GSM voice calls there is no message inviting the
correspondent to “press *”).
(2) For vocal transmissions, this identification message can be replaced with a voice message (see Configuring the dialler locally using the built-in
keypad/Recording or modifying the personalised welcome message for vocal transmissions).
(3) Telephone transmission can be followed by a listen-in period during which the correspondent can listen in to what is happening on the protected
premises in order to confirm the alarm and issue telephone commands.
“bip, dialler identification
n° (2), intrusion,
detector n°, group n°,
press 0 to acknowledge
and terminate”
“long
bip”
The
correspondent
picks up the call
and hears:
press ...,
press ...
The correspondent
listens to the alarm
message delivered
5 times by the
dialler (if it is not
acknowledged)
The dialler confirms
cycle
acknowledgement
and termination
End of call,
long beep
and dialler hangs up
60 s 60 s 60 s
dialling
pick-up
Phone rings
for 60 s max
Event triggered
“press* ...,
press * ...” (1)
The correspondent
listens to sounds in
the home and ends
the listen-in period
by pressing
or hanging up (3)
“long bip,
system
listen-in”
1 2
3 4
5
6 7
8
9
0
*


riiiing
riiiing
PROTECTED
SITE DIALLER
CORRESPONDENT
N.B. for calls to an individual using SMS and MMS digital protocol:
• each correspondent, from n° 1 to 8, can receive SMS alarm calls via the GSM network. The numbers programmed for SMS
cannot acknowledge and terminate the call cycle underway.
• the individual system correspondent, n° 9, can receive up to 5 MMS alarm images via the GSM network with the MMS option.
Depending on the alarm transmitted and the parameters set on the dialler by the installer, a listen-in and speak-out/talk-back
period can be activated. During this period, commands can be sent to the system using the telephone handset keys.
(1) Function only available with GSM media
List of events enabling listen-in period:
• Intrusion
• Intrusion confirmed
• Tamper
• Alarm
• Silent alarm
• Test call
Command description Command n°
Disarm command relay 1 11
relay 2 12
relay 3 13
relay 4 14
Arm command relay 1 21
relay 2 22
relay 3 23
relay 4 24
Stop siren 30
Activate siren 31
Repeat listen-in period for 60 s (5 times max.) #
Stop listen-in and hang up dialler ⁄
Allow speak-out/talk-back 7
Allow listen-in 8
Allow speak-out/talk-back and listen-in (1) 9
for comfort type
applications using
the Daitem receiver
(lighting, etc.)
3.3 List of possible commands during the listen-in period
PSTN
GSM