DAITEM ALARM SYSTEM AND DIALLER, Руководство пользователя, Страница: 4 / 40

4
The LED indicating
the reading zone flashes.
Hold the tag against
the pictogram
.
1. Operating your security system
The control panel can operate up to 8
intrusion protection groups (depending
on the type of control panel) either
individually or at the same time.
• Using a remote control:
or
1.1 Arming or disarming the system
1.2 Deactivating the exit time delay when the last exit is closed
Armed: all groups armed
“bip, Armed”
Off: All groups disarmed
“bip, Off”
• Using a control keypad:
Using a keypad:
+ or
or and
master code
Using a vocal keypad with tag reader and proximity detector
G4 G3
G1 G2
master code
Group disarmed
Group armed
This function allows users to quietly alert a correspondent when they are forced to disarm their alarm system by an intruder.
The system behaves as if it is being disarmed but sends a specific silent alarm message via the telephone line to the remote
monitoring centre.
1.3 Disarming the system under duress (this feature is only available with a remote monitoring service)
Users must check that this specific alert message can be processed by their remote monitoring centre.
IMPORTANT: if a telephone transmission unit card has been installed.
Example: 4 intrusion protection groups
The exit time delay can be deactivated when one of the entrances with a detector programmed for this function is closed.
Deactivation of this time delay can be automatically programmed by determining a door or window detector in charge of
arming one, several or all groups.
“bip, Armed”
or
“bip, Off”
ALARM SYSTEM USER GUIDE