Daily Youth GT5Ds, Руководство пользователя

Страница: 8 / 19

-7-
Step V: Install bulkhead and power line: Firstly, plug the installing holes below the left and right upright poles
and the meter head with 6 bulkhead; finally, connect the power line with one-piece power switch of the
treadmill (note: guarantee the power line is off before connecting the power line, so as to avoid personal
injury), as shown in the figure below:
Step VI: Carefully check if each part of the treadmill is tightened. Run the treadmill at the slow speed and check
if the each part of the running belt is flexibly rotated and whether the tightness of the running belt is proper. As
for the running belt, no offset and sliding will prevail (see “Daily maintenance of powered treadmill”). Move the
treadmill to the proper position and then use it after the check is completed.
VI. Display and function operation of electronic meter
1. Introduction on operating interface of electronic meter