Daikin SUT10D80L21-10-F Скачать руководство пользователя страница 2

Страница: 2 / 61

PIM-00004

△

[Operation Manual]

2/61

DAIKIN INDUSTRIES, LTD.

Before using this product

Give consideration to make users thoroughly understand the contents of this operation manual.

Please incorporate the contents of this operation manual in operation manuals for your machine using this

product.

To ensure proper operation of this unit, be sure to read this operation manual and all other attached

documents carefully, to have a thorough understanding of the equipment, safety information and all other

precautions before installation, operation and maintenance/inspection of this unit.

Be sure to keep this operation manual, attached documents and delivery specifications in place, so that you

can read them whenever required.

For detailed explanation of the unit, all figures and photographs included in this manual show the unit

without covers or safety shields. To operate this unit, be sure to mount the covers and shields in the

specified manner, and observe the operating procedures described in this manual.

The contents of this operation manual are subject to change appropriately for product improvement,

specification change or easier operations.

The latest version of this manual is available through DAIKIN Oil Hydraulics Division Internet Service

(DHCnet HomePage) (http:// www.dhcnet.daikin.co.jp:8100/).

This operation manual should be used as a reference that provides safety instructions for DAIKIN

Hydraulic Unit. In addition to this manual, please prepare safety references for your machine to ensure safe

operations and maintenance in accordance with various standards and norms.

Conventions of safety instructions in this manual

In this manual, safety instructions are classified into three categories: "

DANGER", "

WARNING" and

CAUTION".

DANGER: Improper handling regardless of this indication causes an urgently hazardous condition that

may result in death or serious injury.

WARNING: Improper handling regardless of this indication causes a potentially hazardous condition

that may result in death or serious injury.

CAUTION: Improper handling regardless of this indication causes a potentially hazardous condition

that may result in medium or slight injury, or property damage.

Even an item indicated as "CAUTION" may result in a serious accident depending on the situation. All

instructions given in this manual include important information. Be sure to observe all of them.

Safety precautions

General precautions

DANGER

Transportation, installation, piping, wiring, operations, maintenance and inspections must be conducted

by qualified personnel.

During the above work, wear protective gear required for safe work (work clothes, safety band, helmet,

safety shoes, gloves and so on).

Do not use this unit under conditions other than those specified in the catalog or delivery specifications.

CAUTION

Be sure to conduct daily inspections (described in this manual or attached documents).

Do not apply external force to this unit. (Do not step on, or pound on this unit.) Otherwise, you may

suffer from injury, or the unit may be damaged.

Содержание SUT10D80L21-10-F






























































Результаты поиска

Содержание SUT10D80L21-10-F

Отзывы:

Похожие инструкции для SUT10D80L21-10-F

Бренды по названию

Популярные бренды

Daikin SUT10D80L21-10-F, Руководство по эксплуатации

Результаты поиска

Содержание SUT10D80L21-10-F

Отзывы:

Похожие инструкции для SUT10D80L21-10-F

Бренды по названию

Популярные бренды