Daikin QTRON STARLITE, Руководство пользователя

Страница: 5 / 25

QTRON Starlite User Manual Rev 1.2
1
PREFACE
Thank you for choosing the Qtron Starlite Security and Home Automation system. High
quality, large number of functions and yet simple operation are main advantages of the system.
Hoping that you will be fully satisfied with this choice, we ensure you with our professional
assistance and information on our products.
This manual will explain to you on how to operate your Qtron Starlite security and home
automation system. This system is made up of a control panel, keypads, IO expander module
(optional), telephone voice module (optional), various sensors and detectors. An enclosure will
contain the control panel, which includes the system electronics and standby battery.
TESTING
It is advisable to perform periodical test of the alarm system – check every single detector’s
ability to detect zone violation by opening the protected windows, doors etc. It is also advisable
to check sirens and telephone voice messaging system. Please refer to testing procedures
section in this manual. If your system does not function properly, please contact your system
installer for services.
LIMITATIONS
Even though Qtron Starlite is an advanced security system, it does not 100% guarantee
protections against burglary, fire or other losses. Any alarm system whether commercial or
residential is subject to compromise or failure-to-warn for a variety of reasons. These include:

Intruders may gain access through unprotected openings or have the technical
sophistication to bypass an alarm sensor or disconnect an alarm warning device.

Intrusion detectors, smoke detectors and many sensing devices will not operate without
power. Devices powered by AC will not work if there is no AC power supply for any
reason and their back up batteries are missing, dead or improperly installed.

Alarm warning devices such as sirens or bells may not alert people or wake up sleeper if
they are located on the other side of closed or partly closed door.

Telephone lines needed to transmit alarm from the premise to a central monitoring
station may be out or temporarily out of service. Telephone station lines are subjected to
compromise by sophisticated method of attack.

Smoke detector used in conjunction with the alarm system may not sense fires that start
where smoke cannot reach the detector such as wall, roof or the other side of the door.
Smoke detector also may not sense a fire on another level of residence or carelessness
and safety hazards like smoking in the bed, violent explosions, escaping gas, improper
storage of flammable material, overloaded electrical circuits, and children playing with
matches.

The most common cause of an alarm system not functioning properly when an intrusion
or fire occurs is inadequate maintenance. Therefore, your system should be tested
weekly to ensure all sensors are working properly.

Installing an alarm system may make you eligible for lower insurance rates but an alarm
system is not substitute for insurance. Homeowners, property owners and renters should
continue to insure their lives and properties.