Daikin QTRON STARLITE, Руководство пользователя

Страница: 21 / 25

QTRON Starlite User Manual Rev 1.2
17
GLOSSARY
Arming/Disarm
To ARM is to ON the alarm system and to DISARM is to OFF the alarm system
Battery
A back up power source to provide protection for a limited time in the event of a power failure
Bypass
Removal of one or more protection zones from the system
Central Monitoring Station (CMS)
Central control station to receive the alarm message from QTRON Starlite system.
Chime
A beep tune from the keypad to indicate sensor is activated
Duress Pin
In the event that you are forced by an intruder to disarm your system, you disarm the system
with the duress pin which will cause the system to disarm and simultaneously send a silent
distress signal to the central monitoring station (CMS). Default duress code is
2222.
Entry Delay
The amount of time that you are allowed to enter the premises when the system is armed.
Exit Delay
The amount of time that you are allowed to leave the premises when the system is arming.
User Pin
A four digit pin which can be used to arm and disarm the system from the keypad. They are
total maximum 7 user code can be set.
Master Pin
A four digit pin which can be used to program, reprogram and erase user codes, as well as
arming and disarm the system from the keypad. The Master pin is also equivalent to user 1 pin.
Default Master pin is
1234 .
Zone
An area at which is protected by a security device. Your front door may be designated as Zone
1, while the living room motion detectors maybe designated as Zone 2. Refer to the Zone Label
on your keypad for the Zone Identification of your system. The designated zone number is set
during installer programming.