Daikin QTRON STARLITE, Руководство пользователя

Страница: 14 / 25

QTRON Starlite User Manual Rev 1.2
10
CHAPTER 3: USER PROGRAMMING
User programming can only be access when the alarm system is under disarmed or no alarm
condition. To enter user programming mode, press [COM][Pin][#] . The default Master Pin is
1234. User is advice to change the Master pin once the alarm system had been handover.
To exit the programming mode, press [COM] [#] .
USER PROGRAMMING SUMMARY
CHANGE MASTER PIN
Press [01]+[4 Digit New Pin]+[New Pin]+[#]
ADD/CHANGE USER PIN
Press [02-08]+[4 Digit New Pin]+[New Pin]+[#]
(can set up to maximum 7 users pin 02,03,04,05,06,07,08)
CHANGE DURESS PIN
Press [09]+[4 Digit New Pin]+[New Pin]+[#]
EDIT SYSTEM’S TIME
Press [10]+[Current Time 24 Hour [#]
AUTO ARM TIMER
Press [11]+[Auto Arm Timer]+[#]
AUTO DISARM TIMER
Press [12]+[Auto Disarm Timer]+[#]
ON IO TIMER 1
Press [13]+[Auto On Timer 1]+[#]
OFF IO TIMER 1
Press [14]+[Auto Off Timer 1]+[#]
ON IO TIMER 2
Press [15]+[Auto On Timer 2]+[#]
OFF IO TIMER 2 Press [16]+[Auto Off Timer 2]+[#]
TELEPHONE NUMBER 1
Press [17]+[Phone Number 1]+[#]
TELEPHONE NUMBER 2
Press [18]+[Phone Number 1]+[#]
TELEPHONE NUMBER 3 Press [19]+[Phone Number 1]+[#]
TELEPHONE NUMBER 4
Press [20]+[Phone Number 1]+[#]
3.1 EDIT CONTROL CODE
3.1.1 CHANGE MASTER PIN
Command Information
Press 01 then enter the 4 digits new pin then re-enter
the same pin again and press # after done.

The keypad will sound 2 fast beeps after
pressing 01, then keypad will sound another 2
fast beeps after entering the new pin twice.
Note:
The Code “0000” is not allowed to be used as a pin , Master Code default value: “
1234
”
Press [4 digits Master CODE]
[COM] [0] [#]