Daikin QTRON STARLITE, Руководство пользователя

Страница: 20 / 25

QTRON Starlite User Manual Rev 1.2
16
5.2 SYSTEM TESTING
Users are advised to test the system frequently. System must be tested at least once every three
months . If the system is not functioning accordingly, please contact the nearest dealer for
technical assistance. In order to test the alarm system, system must be on normal mode. There
are5
types of tests: walk test, cms test, siren test, strobe light test and battery test.
5.2.1 WALK TEST
Command Information
Initiate Walk Test
Press [COM]+[1]+[#]

Walk test allow on-site testing for each zone of the system

The keypad will beep twice upon confirmation

The PWR , KEY and MEM light will FLASH to indicate that
the system is currently under the Walk Test.

Each time zone faulted, corresponding zone light will fast
flash and keypad will chime until system exit walk test.
To exit , press [ #] key.

The keypad will beep twice upon confirmation. Back to
normal mode.
5.2.2 CMS TEST
Command Information
Manual test reporting for CMS
Press [COM] +[2]+[#]

The keypad will beep twice upon confirmation. Panel will
generate message to CMS center.
5.2.3 SIREN TEST
Command Information
Test siren
Press [COM]+[3]+[#]

Once command has been acknowledged, the keypad and bell
will sound continuously for 3 seconds.
5.2.4 STROBE LIGHT TEST
Command Information
Test strobe light
Press [COM]+[4]+[#]

Once command has been acknowledged, the strobe light will
on continuously for 3 seconds.
5.2.5 BATTERY TEST
Command Information
Test back-up battery
Press [COM]+[5]+[#]

Battery test takes few seconds

The keypad will beep twice or reject toneas a result.

The indication of low battery can be seen from View System
Service Mode.