Daikin LMSEY1A09AVM01, Руководство по установке

Страница: 20 / 32

6 Configuration
Installation manual
20
LMSEY1A09/13 + LMSEY2A19/25
Daikin LMS
4P728170-1 – 2023.03
Name Description Default Min. Max. UoM Menu
(a)
App
AH
(b)
Relative high temperature alarm threshold 0 0 555/
999
∆°C/°F ●
ALM
●
AL
(b)
Relative low temperature alarm threshold 0 0 200/
360
∆°C/°F ●
ALM
●
Alr
(b)
Alarm present 0 0 1 ●
d2
(b)
Network end defrost synchronised for Primary unit controller 0 0 1 ●
d6
(c)
Display on terminals during defrosts:
▪ 0: temperature alternating with "PSd"
▪ 1: freeze display
▪ 2: "PSd"
1 0 2 ●
d8 Bypass time high temperature alarm after defrost 1 1 240 hours ●
dAs
(b)
DAY status/ECO mode 1 0 1 ●
dC
(b)
Time base for defrosts:
▪ 0: dI in hours, dP1, and dP2 in minutes
▪ 1: dI in minutes, dP1 and dP2 in seconds
0 0 1 ●
dC1
(b)
Time base for d8:
▪ 0: d8 in minutes
▪ 1: d8 in seconds
0 0 1 ●
dfM
(b)
Defrost command:
▪ 0: no
▪ 1: yes
0 0 1 ●
dFn
(b)
Defrost request from serial:
▪ 0: no
▪ 1: yes
0 0 1 ●
dFr
(b)
Defrost status 0 0 1 ●
dFs
(b)
Defrost state idle ●
dI
(b)
Maximum interval between consecutive defrosts 8 0 240 hours ●
dP1
(b)
Maximum defrost duration 45 1 240 min ●
dP2
(b)
Maximum defrost duration auxiliary evaporator 45 1 240 min ●
dS_1
(b)
Network defrost synchronisation for Secondary unit 1:
▪ 0: No synchronisation performed,
▪ 1: Only starting,
▪ 2: Start & Stop.
0 0 2 ●
dS_2 (c) Network defrost synchronisation for Secondary unit 2:
▪ 0: No synchronisation performed,
▪ 1: Only starting,
▪ 2: Start & Stop.
0 0 2 ●
dS_3
(c)
Network defrost synchronisation for Secondary unit 3:
▪ 0: No synchronisation performed,
▪ 1: Only starting,
▪ 2: Start and stop.
0 0 2 ●
dS_4
(c)
Network defrost synchronisation for Secondary unit 4:
▪ 0: No synchronisation performed,
▪ 1: Only starting,
▪ 2: Start and stop.
0 0 2 ●
dt1
(c)
End defrost temperature (read by Sd) 4/
39.2
-50/
58
50/
122
°C/°F ●
dt2 Auxiliary evaporator end defrost temperature (read by Sd2) 4/
39.2
-50/
58
50/
122
°C/°F ●
Eco Eco mode status:
▪ 0 OFF
▪ 1 ON
1 0 1 dir
ESP_1 Enable shared parameters for secondary unit 1 0 0 1 ●