Page 18
IM 820
Remote Controller Operation Guide
Transmission source
•
The source where the signal is
transmitted.
ON Timer Setting
•
Press the SET button will activate
the on timer function.
•
Set the desired on time by pressing
the SET button continuously. If the
timer is set to 7.30am, the air con-
ditioner will turn on at 7.30 sharp.
•
Press the CLR button to cancel the
on timer setting.
Fan Speed Selection
•
Press the button until the desired
fan option displays (auto, low,
med. or high). "Auto" automatically
selects high fan until room temper-
ature is within 2
o
F of setting, then
switches to low fan. Fan runs con-
tinuouse in COOL and cycles in
HEAT.
Signal Transmission Indication
•
Blinks to confirm the last setting
was sent to the unit.
On/Off Button
•
Press once to start the air
conditioner.
•
Press again to stop the air
conditioner.
Operation mode
•
Press the MODE button to select
the type of operating mode.
•
For cooling only unit, the available
modes are : COOL, DRY & FAN.
•
For heat pump unit, the available
modes are: AUTO, COOL, DRY,
FAN & HEAT.
Temperature Setting
•
Set the desired room temperature
by pressing the buttons to increase
or decrease the set temperature.
•
The temperature setting range is
from 60°F to 86°F.
•
Press both buttons simultaneously
to toggle the temperature setting
between °C and °F.
Automatic Air Swing
•
Press the SWING button to
activate the automatic air swing
function.
•
To distribute the air to a specific
direction, press the SWING
button and wait until the air
conditioner baffle swings to the
desired direction. Press the
button again to hold it.
Sleep mode setting
•
Press the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO mode.
•
In COOL mode, the set temperature
will increase 1.0°F after 30 minutes,
2°F after 1 hour and a total of 4°F
after 2 hours.
•
In HEAT mode, the set temperature
will decrease 2°F after 30 minutes,
4°F after 1 hour and a total of 5°F
after 2 hours.
OFF Timer Setting
•
Press the SET button will activate
the off timer function.
•
Set the desired off time by pressing
the SET button continuously.
•
Press the CLR button to cancel the
off timer setting.
Clock Time Setting
•
Press or - to
increase or decrease the
clock time.
Symbol Identification
Cool
Dry
Fan
Heat
Sleep
Power
Timer
Auto
Fan Speed
low
med
high
Auto