IM 820
Page 19
Netware 2 - Wired Wall Control (Optional)
Features:
1.
Modes
- Cool, Heat, Auto, Dry, Fan and Off.
2.
Temperature Range
- 60° F to 86° F. (Press both arrows
simultaneously to convert from °C to °F.)
3.
Timer
- Seven day clock capable of a different On/Off
time for each day of the week. Note: Hold button is used
to temporarily override timer.
4. Shows time of day.
5. Electronic lockout to prevent tampering.
6.
Fan Speeds
- Low, medium, high and auto.
7.
Sleep
- Sets temperature back for sleeping.
8.
Swing
- Swings or positions air baffle for better air dis-
tribution.
9. Display normally shows room temperature. (Momen-
tarily shows set point when a change is made.)
10. Heat symbol ( ) blinks while outdoor coil defrosts
(heat pump only).
11. Error codes blink on display:
E1 - Room sensor loose or defective.
E2 - Indoor coil sensor loose or defective.
E3 - Outdoor coil sensor loose or defective.
E4 - Compressor cycling on overload.
E5 - Low refrigerant charge.
For more detail, see manual that ships with the Wall Control.
SLEEP
FAN
MODE
SET TEMP
SWING
ON TIMER
OFF TIMER
HOLD
DAY
HOUR
MINUTE
CLOCK
ON/OFF
˚F
˚C
COOL
TEMP.
HEAT
TEMP.
ROOM
TEMP.
MON TUE WED THU FRI SAT SUN
ON
OFF
AM
PM
TIME ACTIVATE
SET TIMER
SET CLOCK
SET CLOCK
DRY AUTO COOL HEAT FAN
AUTO
SLEEP
SWING
Ã