15
English
Pass the power supply wiring and the ground wire
(8)
through the conduit (conduit should be fi eld sup-
plied). The hole for running wires through should be
sealed completely to prevent air from entering.
Pass through the conduit
Power supply wiring
and ground wire
Select the corresponding electric heater from the
(9)
electrical wiring diagram and mark the checkbox ( )
for the electric heater with “ ”.
Open the knock hole of the plastic cover provided for
(10)
the front panel (upper) so that the circuit breaker will
be turned on and off through the hole.
* This step is not required for HKR-03 and HKR-06.
Proceed to the next step.
Plastic cover
HKR-05C
, 08C
, 10C
HKR-15C
, 20C
Front panel (upper)
Confi rm that there are no mistakes with the wiring,
(11)
and install the front panel (upper).
On-site setting of heater
(12)
Electric heater capacity setting
(12) -1
Electric Heater capacity
setting (Optional kit)
Mode No.
FIRST
CODE NO.
SECOND
CODE NO.
HKR-03, 05, 06, 08, 10,
15, 20 type
11 (21)
5
01
Without heater
03*
* factory set
Содержание FXTQ12PAVJU
Страница 19: ...3P250363 2B EM09A034A 1011 FS...