Daikin FXFSQ-AVM, Инженерные данные, Страница: 38 / 56

FXFSQ-AVM EDFMT391769A
36
3P468397-1D
3
2-1 ACCESSORIES
Check if the following accessories are attached to the
indoor unit.
Name (1) Drain hose
(2) Metal
clamp
(3) Washer for
hanger
(4) Clamp
Quantity 1 pc. 1 pc. 8 pcs. 6 pcs.
Shape
Name
(5) Installation
pattern paper
(6) Screw
(M4)
(7) Washer
clamp
Joint insulating
material
Quantity 1 sheet 4 pcs. 4 pcs. 1 each
Shape
(8) For gas
piping
(9) For liquid
piping
Name Sealing material
Quantity 1 each 1 sheet 1 pc.
Shape
(10) Large
(11) Medium-1
(12) Medium-2
(13) Small
(14)
Name (15) Installation guide
(Miscellaneous)
• Operation manual
• Installation manual
Quantity 1 sheet
Shape
Upper part
of packing
2-2 OPTIONAL ACCESSORIES
• This indoor unit separately requires a decoration panel and a
remote controller.
• Confi rm if a decoration panel shown in the Table 1 is
prepared and meets your model.
(Refer to the installation manual attached to the decoration
panel for how to install.)
Table 1
Unit model Optional decoration panel
FXFSQ25 · 32 · 40 · 50 · 63 · 80 · 100 · 125 · 140AVM
FXFQ25 · 32 · 40 · 50 · 63 · 80 · 100 · 125 · 140AVM
FXFSQ25 · 32 · 40 · 50 · 63 · 80 · 100 · 125 · 140AV4
FXFQ25 · 32 · 40 · 50 · 63 · 80 · 100 · 125 · 140AV4 BYCQ125EEF/EEK
BYCQ125EAF/EAK
BYCQ125EAPF
BYCQ125EASF
Color : Fresh white/Black
• There are 2 kinds of remote controller; wired type and
wireless type.
Select a remote controller from Table 2 according to
customer request and install in an appropriate place.
(Refer to the installation manual attached to the remote
controller for how to install.)
Table 2
Remote controller
Wired type
Wireless type
BRC1E63
BRC7M634F/K
BRC7M635F/K
Heat pump
Cooling only
NOTE
•
If you wish to use a remote controller that is not listed in
“Table 2” on page 3, select a suitable remote controller after
consulting catalogs and technical materials.
CARRY OUT THE WORK GIVING CAUTION
TO THE FOLLOWING ITEMS AND AFTER THE
WORK IS COMPLETED CHECK THESE AGAIN.
1.
Items to be checked after the installation work is
completed
Items to be checked In case of defective Check column
Are the indoor and outdoor
units rigidly
fi xed?
Drop · vibration ·
noise
Are the installation works of
the outdoor and indoor units
completed?
The unit may
malfunction
or the components
burn out
The unit may
malfunction
or the components
burn out
The unit may
malfunction
or the components
burn out
The unit may
malfunction
or the components
burn out
Have you carried out a
leakage test with the test
pressure
specified in the
outdoor unit installation
manual?
It may result in
insufficient cooling /
insufficient heating
It may result in
insufficient cooling /
insufficient heating
Is the insulation of
refrigerant piping and drain
piping completely carried
out?
Water leakage
Does the drain fl ow out
smoothly?
Water leakage
Is the power supply voltage
identical to that stated in the
manufacturer’s label on the
air conditioner?
Are you sure that there is no
wrong wiring or piping or no
loose wiring?
Is unit safety grounded?
It may result in
electric shock
Are the sizes of electric
wiring according to the
specification?
Is any of air outlets or
inlets of the indoor and
outdoor units blocked with
obstacles?
(It may lead to capacity drop
due to fan speed drop or
malfunction of equipment.)
Have you recorded the
refrigerant piping length
and the refrigerant charge
added?
Refrigerant charge
amount is not clear
Make sure to recheck the items of “SAFETY PRECAUTIONS”.