Daikin FWF02B7FV1B, Руководство по установке

Страница: 22 / 40

Installation manual
18
FWF
Fan coil units
4PW64524-1 – 09.2010
4 Install the fan coil unit
Wired remote controller
Wireless remote controller (Receiver/display unit)
Connector for optional parts
Notes
1 If a remote controller is used, connect it to the unit in accordance with the controller
installation manual.
2 The remote controller model varies according to the combination with the system.
See technical data, catalogues, etc. before connecting.
3 Ground the shield of the remote controller wire to the indoor unit.
(in case of using shield wire)
4 When using the central remote controller, see manual for connection to the unit.
5 X24A,X33A,X35A and X40A are connected when optional accessories are being used.
6 X24A is connected when the wireless remote controller is being used.
7 Availability of R2T and/or R3T is depending on model type.
Z1F Ferrite core
TC Signal transmission circuit
R1T Thermistor (air)
SS1 Selector switch (main/sub)
A3P, A4P Printed circuit board
BS1 Push button (ON/OFF)
H1P Light emitting diode (ON - red)
H2P Light emitting diode (timer - green)
H3P Light emitting diode (filter sign - red)
H4P Light emitting diode (defrost - orange)
SS1 Selector switch (main/sub)
SS2 Selector switch (wireless address set)
X24A Connector (wireless remote controller))
X33A Connector (valve control adaptor)
X35A Connector (external adaptor)
X40A Connector (ON/OFF input from outside)