Daikin FLOSTO150 Скачать руководство пользователя страница 10

Set-up and installation

Installation and operating instructions

10

Daikin FLOSTO150

Hot water storage tank

008.1632099_00 – 03/2019 – EN

4

Set-up and installation

4.1

Installation

4.1.1

Important information

CAUTION

▪ Only install the hot water storage tank if an adequate

ground load-bearing capacity of

 (

500 kg/m²

 plus a

safety factor) is guaranteed. The ground must be flat
and level.

▪ Installation outdoors is only possible to a limited extent.

The storage tank must 

not be exposed to continuous

direct sunlight

 as the UV radiation and the effects of

the weather will damage the housing.

▪ The hot water storage tank must be 

protected from

frost

.

▪ Make sure that the supply company 

does not provide

corrosive domestic water

.

Suitable water treatment may be required.

Requirement:

 The installation location meets the applicable coun-

try-specific requirements.

Incorrect set-up and installation would void the manufacturer's guar-
antee for the device. If there are any questions, please contact our
Technical Customer Service.

4.1.2

Scope of delivery

E

F

Fig. 4-1

Scope of delivery

Item

Designation

A

Storage tank cladding – side panel

B

Storage tank cladding – side panel

C

Storage tank cladding – lid

D

Storage tank cladding – front panel

E

Small accessories: Clips for side panels, screws

F

Documentation

Tab. 4-1

4.1.3

Installing the hot water storage tank

▪ Remove the packaging and dispose of it in an environmentally

sound manner.

▪ Carefully transport the hot water storage tank to the installation

location using the 

recessed grips

.

▪ Install the hot water storage tank at the installation location. 

Recommended distance

 from the wall (a): ≥ 500 mm (

Fig. 4-3

).

INFORMATION

For the installation of an optional 

electric immersion

heater

 (see 

Chap. 3.2.1

), a 

minimum distance 

"X" of

≥ 500 mm is required.

INFORMATION

When installing the unit in a cabinet, behind panels or in
other restricted conditions, sufficient ventilation (e.g. using
ventilation gratings) must be ensured.

▪ Check the horizontal position. Slight unevennesses can be com-

pensated by four height-adjustable feet.

Fig. 4-2

Height-adjustable feet

Содержание FLOSTO150

























Отзывы: