Daikin FDMRN20AV1K, Руководство по установке

Страница: 16 / 48

14
Interconnection cable
Outdoor unit
Terminal Block
Indoor unit
Terminal Block
Model Indoor (FDMRN) 36A 50/60A
Outdoor (RR) 36A 50/60A
Voltage range** Indoor
220-240V/~/50Hz+
!
Outdoor 380-415V/3N~/50Hz+ !
Power supply cable size* mm
2
Number of conductors
2.5
5
2.5
5
Interconnection cable size* mm
2
Number of conductors
2.5
4
2.5
4
Recommended time delay fuse* A 16 16
COMP
L
N
COMP
L
N
R
S
T
N
Attach insulation sleeve
Round crimp-style terminal
Electric wire
All wires must be firmly connected.
Make sure all the wire do not touch the refrigerant pipings, compressor or any moving parts.
The connecting wire between the indoor unit and the outdoor unit must be clamped by using provided cord anchorage.
The power supply cord must be equivalent to H07RN-F which is the minimum requirement.
Make sure no external pressure is applied to the terminal connectors and wires.
Make sure all the covers are properly fixed to avoid any gap.
Use round crimp-style terminal for connecting wires to the power supply terminal block. Connect the wires by matching
to the indication on terminal block. (Refer to the wiring diagram attached on the unit). •
•
•
•
•
•
•
Connect wires of the
same gauge to both side. Do not connect wires of the
same gauge to one side. Do not connect wires
of different gauges.
Used the correct screwdriver for terminal screws tightening. Unsuitable screwdrivers can damage the screw head.
Over tightening can damage the terminal screws.
Do not connect wire of different gauge to same terminal.
Keep wiring in an orderly manner. Prevent the wiring from obstructing other parts and the terminal box cover. •
•
•
•
There must be an all pole
disconnection in the supply
mains with a contact separation
of at least 3mm.
!
S / L2
N
Main
Switch
Fuse /
Circuit
Breaker
Power
Supply
R / L1
T / L3
Power
Supply
Cable
FDMRN36/50/60A - RR36/50/60A (3PH)
1-IM-5CC(HA)-1115(9)-DAIKIN-EN.i14 14 1-IM-5CC(HA)-1115(9)-DAIKIN-EN.i14 14 6/10/21 12:38:08 PM 6/10/21 12:38:08 PM