![background image](http://html1.mh-extra.com/html/daikin/fdm24pev1k/fdm24pev1k_operation-and-installation-instructions-manual_4700270016.webp)
5.7 Air Exchange Setting*
Function
button into this function setting (Air mark
blinks). AIR 1 displayed at the ambient temperature-displayed location (888) is defaulted
(the last type of AIR will be displayed after adjustment). Press
Under on-state of the unit, press
or button to adjust air
Enter/Cancel
button to turn on/off air exchange function. After
There are 10 types of ir xchange, but only 1-2 types are for wireless remote control. Refer to the following
1 —— The unit continuously runs for 60min, and fresh air valve opens for 6 min.
2 —— The unit continuously runs for 60min, and fresh air valve opens for 12 min.
3 —— The unit continuously runs for 60min, and fresh air valve opens for 18 min.
4 —— The unit continuously runs for 60min, and fresh air valve opens for 24 min.
5 —— The unit continuously runs for 60min, and fresh air valve opens for 30 min.
6 —— The unit continuously runs for 60min, and fresh air valve opens for 36 min.
7 —— The unit continuously runs for 60min, and fresh air valve opens for 42 min.
8 —— The unit continuously runs for 60min, and fresh air valve opens for 48 min.
9 —— The unit continuously runs for 60min, and fresh air valve opens for 54 min.
10 —— The unit continuously runs for 60min, and fresh air valve a
l
ways opens.
Function
button into air exchange function.
Enter/Cancel
button to turn off
During air exchange function, press
Air exchange setting is shown as Fig.5.7:
Turn on the unit, without
ning on air exchange
tur
Press “Function” button
into air exchange function
Press “ ” or “ ”
button to adjust the type of air
Press “Enter/Cancel” button
Press “Function” button
Press “Enter/Cancel” button
to turn off air exchange function
to turn on air exchange
Fig.5.7 Air exchange device
Note:
In air exchange mode, press button or there is no any operation within 5s after the last button
operation, the system will quit from air exchange setting ,and current setting data won’t be
memoried.
Turn n
a
ir exchange function:
Turn off air exchange function:
-o
-
function
function
details:
a e
In this case, air mark is blinking, and then press
this function. Air mark will subsequently disappear.
exchange
“Function”
e
this function, the
a
ir mark shows.
xchange type. Press
turning on
into air exchange function
English
14