D
–EIMWC00408-16EN - 6/60
General information
IMPORTANT
The units described in the present manual represent a valuable investment. Maximum care should be taken to
ensure correct installation and appropriate working conditions of the units.
A maintenance contract with a authorized service centre is highly recommended.
CAUTION
This manual provides information about the features and procedures for the complete series.
All units are delivered from factory as complete sets which include wiring diagrams and dimensional drawings with
size, weight and features of each model.
WIRING
DIAGRAMS
AND
DIMENSIONAL
DRAWINGS
MUST
BE
CONSIDERED
ESSENTIAL
DOCUMENTS
OF
THIS
MANUAL
In case of any discrepancy between this manual and the two aforesaid documents, please refer to the wiring diagram
and dimensional drawings.
IMPORTANT
The present Installation and Maintenance Manual is drawn up for information only and does not constitute an offer
binding upon Daikin
Specifications are subject to change without prior notice. Refer to the data communicated at the time of the order as
per the
“Documents Certified” such as “Dimensional Drawings”, “Wiring diagrams” and “Nameplate”. Daikin explicitly
reject any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or
interpretation of this Installation and Maintenance Manual.
Key to symbols
Important note: failure to respect the instruction can damage the unit or compromise functioning
Note regarding safety in general or respect of laws and regulations
Note concerning electrical safety
Safe use and maintenance of the unit, as explained in this manual, is fundamental to prevent accidents during operation
and maintenance and repair work.
Therefore, it is highly recommended that this document be read carefully, complied with and stored safely.
Warnings for the operator
The operator must read this manual before using the unit.
The operator must be trained and instructed on how to use the unit.
The operator must strictly follow local safety regulation and laws.
The operator must strictly follow all instruction and limitation given for the unit
Assistance
Should additional maintenance be required, it is advisable to consult authorised staff before carrying out any repair work.
Spare parts
Spare parts to be used for maintenance of the unit must be original. Therefore, always consult the manufacturer.
Receiving the machine
The machine must be inspected for any possible damage immediately upon reaching its final place of installation. All
components described in the delivery note must be carefully inspected and checked; any damage must be reported to
the carrier. Before connecting the machine to earth, check that the model and power supply voltage shown on the
nameplate are correct. Responsibility for any damage after acceptance of the machine cannot be attributed to the
manufacturer.
