Daikin EKHBH008BB Series, Руководство по установке

Страница: 61 / 64

EKHBH/X008BB
Indoor unit for air to water heat pump system
4PW62570-1A – 01.2011
Installation manual
58
11. T
ROUBLESHOOTING
11.2. General symptoms
Symptom 10: Unexpected backup heater operation
A
PPENDIX
(for restricted power supply condition mode only)
First
code Second
code
Setting name
Installer setting at variance with default value
Default
value Range Step Unit Date Value Date Value
d Restricted power supply condition mode/local shift value weather dependent
00 Not applicable. Do not change the default value. 0 0/1/2/3 1 —
01 Not applicable. Do not change the default value. 0 (OFF) 0/1/2 1 —
02 Restricted power supply condition mode 0 (OFF) 0/1 — —
03 Local shift value weather dependent 0 (OFF) 0/1/2/3/4 1 —
04 Not applicable. — — — —
05 Pump operation forced off or permitted during
backup heater is forced off at benefit kWh rate
power supply ([d-00]=0 or 1)
0 (forced
off)
0/1 1 —
06 Not applicable. — — — —
E Unit information readout
00 Software version Read only — — —
01 EEPROM version Read only — — —
02 Unit model identification. Do not change the default
value. depending
on model
— — —
03 Liquid refrigerant temperature Read only — 1 °C
04 Inlet water temperature Read only — 1 °C
F Option setup
00 Pump operation stop 0
(enabled)
0/1 1 —
01 Space cooling permission temperature 20 10~35 1 °C
02 Bottom plate heater ON temperature 3 3~10 1 °C
03 Bottom plate heater hysteresis 5 2~5 1 °C
04 Functionality of X14A
(a)
. 1 0/1 — —
Underfloor heating screed dry-out program
05 Action number selection 1 1~20 1 —
06 Heating set point of selected action number [F-05] 25.0
(b)
15~55 1 °C
07 Time of selected action number [F-05] 0
(b)
0~72 12 hour
08 Underfloor heating screed dry-out program enabled/
disabled
0 (OFF) 0/1 1 —
09 Latest action number executed
0
0~21
(Read only)
0 —
(a) Only possible to modify the first 3 minutes after power ON.
(b) For all action numbers of [F-05].
P
OSSIBLE CAUSES
C
ORRECTIVE ACTION
Entering water temperature is too
low and leaving water temperature
>25°C. Increase the water flow.
Too frequent use of the backup
heater during heating operation or
domestic water heating. The water volume in the cicuit is too
low.