6
Setting no. of programmed time
(Fig. 4)
(Example)
Time No. 5 (to be programmed
only when used in conjunction
with the central remote con-
troller)
Monday to Friday:
Operating from 8:45 a.m. till
5:00 p.m.
Operating from 5:15 p.m. till
11:00 p.m.
Saturday and Sunday:
Setting the whole day stop oper-
ation (application for holidays)
controlled by programmed time.
1.
Press the PROGRAMMING
START BUTTON. Programming is
available.
The display “ PROGRAM
START ”
appears, and the display of days of a
week flashes.
2.
Press the TIME No. BUTTON,
and select the desired number.
(NOTE)
• Unless used in conjunction with the cen-
tral remote controller, The TIME No. is
not displayed and can not be selected.
3.
Press the BUTTON FOR
SELECTING DAYS OF A WEEK,
and set the proper day of the week.
Each time you press it, the flash-
ing display of days of a week shifts
to the right.
(1) Setting programmed time
4.
Set the programmed time of
system start 1 by using the HOUR/
MINUTE BUTTON. Each time the
HOUR/MINUTE BUTTON is
pressed, the display is put forward
minute by minute and hour by
hour. When the button is kept
pressed, the display is put forward
continuously.
5.
Press the TIMER ON BUTTON,
and set the programmed time of
system start 1. Each time you
press it, the next area to be set
flashes.
(NOTE)
• Set the other programmed time in the
same procedure.
1
2
Select the TIME No. 5.
3
Set to Monday.
4
Set the “PROGRAMMED TIME OF
SYSTEM START 1” at 8:45 a.m.
5
01_EN_3P124623-5C.fm Page 6 Wednesday, August 3, 2005 2:20 PM
