Daikin DST301BA61 Скачать руководство пользователя страница 4

1

SAFETY CONSIDER-
ATIONS

Please read these “ SAFETY CONSIDER-
ATIONS ” carefully before installing air condition-
ing equipment and be sure to install it correctly. 
After completing the installation, make sure that 
the unit operates properly during the start-up 
operation.
Please instruct the customer on how to operate 
the unit and keep it maintained.
Also, inform customers that they should store 
this installation manual along with the operation 
manual for future reference.
This air conditioner comes under the term “ appli-
ances not accessible to the general public ”.

Meaning of warning, caution and note symbols.

WARNING

............. Indicates a potentially 

hazardous situation 
which, if not avoided, 
could result in death or 
serious injury. 

CAUTION

............. Indicates a potentially 

hazardous situation 
which, if not avoided, 
may result in minor or 
moderate injury.  It 
may also be used to 
alert against unsafe 
practices.

NOTE

................... Indicates situation 

that may result in 
equipment or prop-
erty-damage-only 
accidents.

Keep these warning sheets handy so that 
you can refer to them if needed.

Also, if this equipment is transferred to a new 
user, make sure to hand over this operation 
manual to the new user.

WARNING

In order to avoid electric shock, fire or injury, 
or if you detect any abnormality such as 
smell of fire, turn off power and call your 
dealer for instructions.
Ask your dealer for installation of the air 
conditioner.

Incomplete installation performed by your-
self may result in a water leakage, electric 
shock, and fire.

Ask your dealer for improvement, repair, 
and maintenance.

Incomplete improvement, repair, and main-
tenance may result in a water leakage, elec-
tric shock, and fire.

Improper installation or attachment of 
equipment or accessories could result in 
electric shock, short-circuit, leaks, fire or 
other damage to the equipment. Be sure 
only to use accessories made by Daikin 
which are specifically designed for use 
with the equipment and have them 
installed by a professional.
Ask your dealer to move and reinstall the 
air conditioner or the remote controller. 

Incomplete installation may result in a water 
leakage, electric shock, and fire.

Never let the indoor unit or the remote 
controller get wet. 

It may cause an electric shock or a fire.

Never use flammable spray such as hair 
spray, lacquer or paint near the unit.

It may cause a fire.

Never replace a fuse with that of wrong 
ampere ratings or other wires when a 
fuse blows out.

Use of wire or copper wire may cause the 
unit to break down or cause a fire.

Never inspect or service the unit by your-
self.

Ask a qualified service person to perform this 
work.

Cut off all electric waves before mainte-
nance.
Do not wash the air conditioner or the 
remote controller with excessive water.

Electric shock or fire may result.

Do not install the air conditioner or the 
remote controller at any place where 
flammable gas may leak out.

If the gas leaks out and stays around the air 
conditioner, a fire may break out.

Do not touch the switch with wet fingers.

Touching a switch with wet fingers can cause 
electric shock. 

CISPR 22 Class A Warning:

This is a class A product. In a domestic envi-
ronment this product may cause radio inter-
ference in which case the user may be 
required to take adequate measures.

01_EN_3P124623-5C.fm  Page 1  Wednesday, August 3, 2005  2:20 PM

Содержание DST301BA61

















Отзывы: