Daikin DST301BA61 Скачать руководство пользователя страница 10

7

(2) Set the next day of the week.

Set the day of the week to Tuesday, and 

copy the program of the previous day 

(Monday).  In the same procedure, set the 

day of the week to Wednesday through Fri-

day in sequence.

6.

Press the BUTTON FOR 

SELECTING DAYS OF A WEEK 

and set the following day.  Press 

the BUTTON FOR COPYING PRO-

GRAM OF PREVIOUS DAY. The 

same program as that of the imme-

diately preceding day of the week 

is set.

(NOTE)

• Repeat each procedure 3 – 5 in the 

above when not copying the contents of 
the previous day.

(3) Holiday setting

7.

Press the BUTTON FOR 

SELECTING DAYS OF A WEEK 

and set one or more days of the 

week as holiday.  Press the HOLI-

DAY SETTING BUTTON, and the 

display “ OFF ” is displayed at the 

top of the day of the week.  If you 

press it again, the display returns 

to the original state.

8.

Press the PROGRAMMING 

START BUTTON, and finish the 

program setting.

(NOTES)

• Unless the button is pressed within 20 

minutes, the display will automatically 
revert back to the original state. In this 
case, setting contents up to the point 
where the TIMER ON BUTTON (or HOL-
IDAY SETTING BUTTON or BUTTON 
FOR COPYING PROGRAM OF PREVI-
OUS DAY) is pressed will only take 
effect.

• The display “ PROGRAM   

START ” 

and the display of days of a week “ — ” 
disappears.

• The flashing display goes off, and the 

No. of programmed time of the present 
day is displayed.  Then the operation 
controlled by timer starts.

• The operation controlled by timer is exe-

cuted even while the program is being 
set.

„

„

„

„

Change and cancellation of no. 
of programmed time (Fig. 5)

(Example)

Time No. 3 (to be set only when 

used in conjunction with the 

central remote controller)

1.

Press the PROGRAMMING 

START BUTTON.  The program 

setting is ready.  The display 

“ PROGRAM  

START ” appears, 

and the display of days of a week 

flashes.

2.

Press the TIME No. BUTTON, 

and select the desired No.

6

7

Set Saturday and Sunday as holidays.

8

This is the end of the setting example.

Operating from
8:45 a.m. till
5:00 p.m.

A: Change/
cancel partially

(Wednesday)
After operating 
from 8:45 a.m. 
till 7:00 p.m., 
the operation 
stops.

Operating from
5:15 p.m. till
11:00 p.m.

B: Cancel the 
whole

(Thursday)
Whole day 
stop.

1

2

Select the time No. 3.

01_EN_3P124623-5C.fm  Page 7  Wednesday, August 3, 2005  2:20 PM

Содержание DST301BA61

















Отзывы: