manualshive.com logo in svg

Daikin DM92SN, Инструкция по эксплуатации, Страница: 2 / 63

Поделиться
Скачать
Daikin DM92SN Скачать руководство пользователя страница 2

2

IMPORTANT INFORMATION

IMPORTANT INFORMATION

Pride and workmanship go into every product to provide our customers with quality products.  It is possible, however, 

that during its lifetime a product may require service.  Products should be serviced only by a qualified service technician 

who is familiar with the safety procedures required in the repair and who is equipped with the proper  tools, parts, testing 

instruments and the appropriate service manual.  

REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE 

SERVICE MANUAL BEFORE BEGINNING REPAIRS.

IMPORTANT NOTICES

  RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

WARNING

This unit should not be connected to, or used in conjunction with, any devices that are not design certified for use with this 

unit or have not been tested and approved by the manufacturer. Serious property damage or personal injury, reduced unit 

performance and/or hazardous conditions may result from the use of devices that have not been approved or certified by the 

manufacturer.

WARNING

HIGH VOLTAGE

Disconnect ALL power before servicing or in

-

stalling this unit. Multiple power sources may 

be present. Failure to do so may cause proper

-

ty damage, personal injury or death.

WARNING

To prevent the risk of property damage, personal injury or 

death, do not store combustible materials or use gasoline 

or other flammable liquids or vapors in the vicinity of this 

appliance.

Содержание DM92SN
































































Отзывы:

Нет отзывов