SiBE12-908
Operation Manual
Installation / Operation Manual
79
3.5
FRESH AIR SUPPLY VENTILATION
14
FRESH AIR SUPPLY VENTILATION
This function takes in outdoor air to refresh indoor air.
T
o start FRESH AIR SUPPLY VENTILATION
1.
Press “HUMIDIFY/VENTILATE” button, and select a
FRESH AIR SUPPLY VENTILATION mode.
• “
” is displayed on the LCD.
To cancel FRESH AIR SUPPLY VENTILATION
2.
Press “HUMIDIFY/VENTILATE” button, and select a OFF.
• “
” disappears from the LCD.
NOTE
Mode
Cyclic of humidity settings
Multi-monitor lamp
HEAT
Lit white for 2 seconds.
After that, return to
the color of selected
operation mode or
change to yellow in a
standby state.
AUTO
COOL
DRY
FAN
Notes o
n FRESH AIR SUPPLY VENTILATION
An example of FRESH AIR SUPPLY VENTILATION (page 26.)
• Fresh air is taken from outdoor through the outdoor unit.
• The outdoor noise and odor may be captured because the outdoor air is taken into the room. The operation noise is slightly louder.
• When the outdoor temperature is higher than room temperature, the airflow rate of FRESH AIR SUPPLY VENTILATION will be low.
1, 2
Select
First selected priority
Initial state of operation
Room B
Room A
Room B
Room A
Room B
Room A
• The unit not in operation in Room B will
go into ventilation while the unit in
Room A is in COOL operation besides
ventilation.
The result is shown in the illustration on
the right.
• The unit in first selected priority
operation in Room A will take
precedence, and the unit in Room B will
go into a standby state. (Yellow) In case
you will start ventilation the unit in
Room B, the ventilation of Room A
have to be stopped.
The result is shown in the illustration on
the right.
• After the ventilation of Room A is
stopped, the unit in Room B will go into
ventilation operation.
COOL/
SUPPLY VENTILATION
TION
COOL/
SUPPLY VENTILATION
COOL/
SUPPL
SUPPLY VENTILA
VENTILATION
TION
COOL/
SUPPLY VENTILATION
FAN/
SUPPL
SUPPLY VENTILA
VENTILATION
TION
FAN/
SUPPLY VENTILATION
BLUE
YELLOW
BLUE
BLUE
WHITE
Not appear
COOL
COOL
