Daikin CTXU25G2V1B Скачать руководство пользователя страница 78

Страница: 78 / 175

SiBE12-908

Operation Manual

Installation / Operation Manual

3.3

Adjusting the Airflow Direction

You can adjust the airflow direction to increase your comfort.

o adjust the flaps (horizontal blades)

Press “SWING

” button.

“

” is displayed on the LCD and the flaps will begin to swing.

When the flaps have reached the desired position, press
“SWING

” button once more.

•

The flaps will stop moving.

• “

” disappears from the LCD.

To adjust the louvers (vertical blades)

Press “SWING

” button.

• “

” is displayed on the LCD.

When the louvers have reached the desired position, press
the “SWING

” button once more.

• The louvers will stop moving.

• “

” disappears from the LCD.

Adjusting the upper and lower airflow direction

Adjusting the right and left airflow direction

1, 2

3, 4

Содержание CTXU25G2V1B
















































































































































































Результаты поиска

Содержание CTXU25G2V1B

Отзывы:

Daikin CTXU25G2V1B, Руководство по обслуживанию, Страница: 78 / 175

Результаты поиска

Содержание CTXU25G2V1B

Отзывы: