SiBE07-618_C
Operation Manual
Operation Manual
53
17
To use ON TIMER operation
•
1. Press “ON TIMER button”.
is displayed.
blinks.
2.
•
3.
• The TIMER lamp lights up.
To cancel ON TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is shown below.
ATTENTION
In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote controller.
2
1, 3
4
Display
(Example)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
Check that the clock is correct. If not, set
the clock to the present time.
Press “TIMER Setting button”
until the time setting reaches
the point you like.
Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either but-
ton changes the setting rapidly.
Press “ON TIMER button”
again.
Present time: 11:00 p.m.
(The unit operating)
3P196326-9C
