English
8
•
After adjusting the indoor unit height, attach the corner cover.
(Refer to Fig. 18)
(2) Wiring the decoration panel.
CAUTION
Make sure to turn off the power supply before wiring work.
〈〈
When wiring of the indoor unit and installation of the decoration panel are conducted simulta-
neously
〉〉
1)
Remove the control box lid of the indoor unit.
(Refer to Fig. 19)
Fig. 18
Hole of decoration panel
Tab (2 places)
After inserting the tab into the hole
of decoration panel, insert the remaining
tabs (2 places) in the hole to install.
Tab
1)
Screw (2 places)
1)
Control box lid
Loosen screws (2 places), slide the lid to the arrow direction,
and remove the hooking part and keyhole.
Keyhole
Hooking part
Fig. 19
01_EN_3P328940-1.fm Page 8 Monday, September 24, 2012 10:00 AM
