7
English
IN THE CASE OF CENTRALIZED
CONTROL SYSTEM
If the indoor unit is under centralized control, it is
necessary to switch the remote controller’s setting.
In this case, contact your DAIKIN dealer.
If the temperature or the humidity is beyond the
following conditions, safety devices may work
and the air conditioner may not operate, or
sometimes, water may drop from the indoor unit.
COOLING
[
°
C]
HEATING
[
°
C]
DB: Dry bulb temperature
WB: Wet bulb temperature
The setting temperature range of the remote
controller is 16
°
C to 32
°
C.
4. OPERATION RANGE
OUTDOOR
UNIT
INDOOR
OUTDOOR
TEMPERA-
TURE
TEMPERATURE HUMIDITY
RZQG
DB
18 to 37
80% or
below
DB –15 to 50
WB
12 to 28
RZQSG71·
100·140
DB
21 to 37
80% or
below
DB –10 to 43
WB
14 to 28
RZQ200
DB
21 to 37
80% or
below
DB
–5 to 46
WB
14 to 28
OUTDOOR
UNIT
INDOOR
TEMPERATURE
OUTDOOR
TEMPERATURE
RZQG
DB
10 to 27
DB
–19.5 to 21
WB
–20 to 15.5
RZQSG71 DB
10 to 30
DB
–14 to 21
WB
–15 to 15.5
RZQSG
100·140
DB
10 to 28
DB
–14 to 21
WB
–15 to 15.5
RZQ200
DB
10 to 27
DB
–14 to 21
WB
–15 to 15
Refer to figure 1 on page [1]
•
Operating procedure varies with heat
pump type and cooling only type. Contact
your Daikin dealer to confirm your system
type.
•
To protect the unit, turn on the main power
switch 6 hours before operation.
•
Do not shut OFF the power during sea-
sonal use of the unit.
This is required in order to activate the unit
smoothly.
•
If the main power supply is turned off dur-
ing operation, operation will restart auto-
matically after the power turns back on
again.
Operate in the following order.
•
AUTOMATIC OPERATION can be
selected only by Heat pump split system.
•
For cooling only type, “COOLING”, and
“FAN” and “PROGRAM DRY” operation
are able to select.
Refer to figure 1-1, 2 on page [1]
OPERATION MODE
SELECTOR
Press OPERATION MODE SELECTOR
BUTTON several times and select the
OPERATION MODE of your choice as
follows.
COOLING OPERATION ....................... “
”
The recommended temperature setting is 26
to 28°C.
HEATING OPERATION ........................ “
”
The recommended temperature setting is 18
to 23°C.
5. OPERATION PROCEDURE
COOLING, HEATING, AUTOMATIC,
FAN, AND PROGRAM DRY OPERA-
TION
1
MODE
01_EN_3P302565-1.fm Page 7 Monday, February 13, 2012 4:09 PM