English
6
Precautions in handling remote con-
troller
Direct the transmitting part of the remote
controller to the receiving part of the air
conditioner.
If something blocks the transmitting and receiv-
ing path of the indoor unit and the remote con-
troller as curtains, it will not operate.
Transmitting distance is approximately 7 m.
Do not drop or get it wet.
It may be damaged.
Never press the button of the remote con-
troller with a hard, pointed object.
The remote controller may be damaged.
Installation site
•
It is possible that signals will not be received
in rooms that have electronic fluorescent
lighting. Please consult with the salesman
before buying new fluorescent lights.
•
If the remote controller operated some
other electrical apparatus, move that
machine away or consult your dealer.
Placing the remote controller in the
remote controller holder
Install the remote controller holder to a wall
or a pillar with the attached screw. (Make
sure it transmits)
3. HANDLING FOR WIRELESS
REMOTE CONTROLLER
2 short beeps from
the receiver indicates
that the transmission
is properly done.
Receiver
How to put the dry batteries
(1)
Remove the back cover
of the remote controller
to the direction pointed
by the arrow mark.
(2)
Put the batteries
Use two dry cell batter-
ies (AAA.LR03 (alka-
line)). Put dry batteries
correctly to fit their (+)
and (–).
(3)
Close the cover
When to change batteries
Under normal use, batteries last about a
year. However, change them whenever the
indoor unit doesn’t respond or responds
slowly to commands, or if the display
becomes dark.
[CAUTIONS]
•
Replace all batteries at the same time, do
not use new and old batteries intermixed.
•
In case the remote controller is not used
for a long time take out all batteries in order
to prevent liquid leak of the battery.
Placing the remote
controller
Slide from above
Remote
controller
holder
Removing the
remote controller
Pull it upward
01_EN_3P302565-1.fm Page 6 Monday, February 13, 2012 4:09 PM