English
21
Setting Method of the Cooling/Heating Selection Eligibility
(VRV only)
Setting Changes
See page 22 for an explanation of the cooling/heating selection eligibility.
1
Set temperature
28
°C
Cool
Return Setting
Set temperature
28
°C
Cool
Return Setting
Continue pressing Operation Mode
●
Selector button of the remote controller for
at least four seconds. (During backlight lit)
A remote controller will not display
“
” (Changeover under control) if a
cooling/heating selection eligibility is
granted to the remote controller.
The display “
●
” (Changeover under control) on
each remote controller connected to the same
outdoor unit or BS unit will start blinking.
Vent mode setting changes are possible regardless of the
*
cooling/heating selection eligibility.
If a cooling/heating selection eligibility is set in the cooling/
*
heating selection remote controller ( ), all the remote controllers
will display “
” (Changeover under control). In this case, no
cooling/heating selection eligibility can be set in the remote
controllers.
Refer to the operation manual provided to the outdoor unit for the
details of the cooling/heating selection remote controller.
Set a cooling/heating selection eligibility as
●
explained below.
The display “ ” (Changeover under control) will blink when the power is turned ON for the first time.
Selection Settings
2
Set temperature
28
°C
Cool
Return Setting
Set temperature
28
°C
Cool
Return Setting
Press Operation Mode Selector button
●
of the remote controller for which the
selection eligibility to be set.
Then the cooling/heating selection
eligibility will be set and the display
“
” (Changeover under control) will
disappear.
The display “
” (Changeover under
control) will appear on the other remote
controllers.
01_EN_3P243520-1B.indd 21
01_EN_3P243520-1B.indd 21
5/15/2009 10:21:06 AM
5/15/2009 10:21:06 AM
