Daikin ARXS20G2V1B, Руководство по обслуживанию, Страница: 35 / 316

Printed Circuit Board Connector Wiring Diagram SiENBE04-808_A
23 Printed Circuit Board Connector Wiring Diagram
1.2.2 RK(X)S20-35G2V1B9, ARXS20-35G3V1B
Connectors and
Other Parts PCB (1): Filter PCB
PCB (2): Main PCB
PCB (3): Forced Operation Button PCB
1) S11 Connector for main PCB
2) AC1, AC2, S Connector for terminal board
3) E1, E2 Terminal for earth
4) HL2, HN2 Connector for main PCB
5) HR1 Connector for reactor
6) FU1 Fuse (3.15 A, 250 V)
7) FU3 Fuse (20 A, 250 V)
8) V2, V3 Varistor
1) S10 Connector for filter PCB
2) S20 Connector for electronic expansion valve coil
3) S40 Connector for overload protector
4) S50 Connector for magnetic relay
5) S70 Connector for fan motor
6) S80 Connector for four way valve coil
7) S90 Connector for thermistors
(outdoor temperature, outdoor heat exchanger, discharge pipe)
8) S100 Connector for forced operation button PCB
9) HL3, HN3 Connector for filter PCB
10)HR2 Connector for reactor
11)U, V, W Connector for compressor
12)FU2 Fuse (3.15 A, 250 V)
13)LED A LED for service monitor (green)
14)V1 Varistor
15)J4 Jumper for facility setting
∗
Refer to page 291 for detail.
16)J5 Jumper for improvement of defrost performance
∗
Refer to page 292 for detail.
1) S110 Connector for main PCB
2) SW1 Forced operation ON/OFF button
SiENBE04-808_A.pdf 35 21/02/2011 13:19:55