Daikin Altherma 3 H MT W, Руководство по установке для специалистов

Страница: 193 / 296

10 | Configuration
Installer reference guide
193
EPRA08~W1 + ETBH/9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03
9
Installer settings
Commissioning
Information
User settings
User profile
[9]
Installer settings
[9.1] Configuration wizard
[9.2] Domestic hot water
[9.3] Backup heater
[9.4]
Booster heater
[9.5] Emergency
[9.6] Balancing
[9.7] Water pipe freeze prevention
[9.8] Benefit kWh power supply
[9.9] Power consumption control
[9.A] Energy metering
[9.B] Sensors
[9.C]
Bivalent
[9.D] Alarm output
[9.E] Auto restart
[9.F] Power saving function
[9.G] Disable protections
[9.H] Forced defrost
[9.I] Overview field settings
[9.N] Export MMI settings
[9.P]
Bizone kit
Configuration wizard
After first power ON of the system, the user interface will guide you using the
configuration wizard. This way you can set the most important initial settings. This
way the unit will be able to run properly. Afterwards, more detailed settings can be
done via the menu structure if required.
To restart the configuration wizard, go to Installer settings >
Configuration wizard [9.1].
Domestic hot water
This part only applies to systems with an optional domestic hot water tank
installed.
Domestic hot water
The following setting determines if the system can prepare domestic hot water or
not, and which tank is used. Set this setting according to the actual installation.