Daikin Altherma 3 H HT EPRA14DAW1, Руководство по установке для специалистов

Страница: 257 / 260

11/11
Breadcrumb Field code Setting name Range, step
Default value
Date
Official Value
Installer setting at variance with
default value Field settings table
9.I [D-01] R/W 0: No
1: Active open
2: Active closed
3: Safety thermostat
9.I [D-02] R/W 0: No DHW pump
1: Instant hot water
2: Disinfection
3: Circulation
4: Circulation and disinfection
9.I [D-03] R/W 0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
9.I [D-04] R/W 0: No
1: Pwr consmp ctrl
9.I [D-05] R/W 0: Forced off
1: As normal
9.I [D-07] R/W
0: No
1: Yes
9.I [D-08] R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
9.I [D-09] R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
9.I [D-0A] 0
9.I [D-0B] 2
9.I [D-0C] 0
9.I [D-0D] 0
9.I [D-0E] 0
9.I [E-00] R/O 0~5
0: LT split
9.I [E-01] R/O
1
9.I [E-02] R/W (*5)
R/O (*6) 0: Reversible (*5)
1: Heating only (*6)
9.I [E-03] R/O 3: 6V (*1)
4: 9W (*2)
9.I [E-04] R/O 0: No
1: Yes
9.I [E-05] R/W 0: No (*3)
1: Yes (*4)
9.I [E-06]
1
9.I [E-07] R/W
0~6
0: EKHW (*3)
1: Integrated (*4)
5: EKHWP (*3)
9.I [E-08] R/W 0: disabled
1: Enabled
9.I [E-09] 1
9.I [E-0B] R/O
0
9.I [E-0C]
0
9.I [E-0D] R/W
0: No
1: Yes
9.I [E-0E] 0
9.I [F-00] R/W 0: Disabled
1: Enabled
9.I [F-01] R/W 10~35°C, step: 1°C
20°C
9.I [F-02] 3
9.I [F-03]
5
9.I [F-04]
0
9.I [F-05] 0
9.I [F-09] R/W 0: Disabled
1: Enabled
9.I [F-0A]
0
9.I [F-0B] R/W
0: No
1: Yes
9.I [F-0C] R/W 0: No
1: Yes
9.I [F-0D] R/W 0: Continuous
1: Sample
2: Request
Close shut-off valve during cooling?
What is the pump operation mode?
--
--
Pump operation during flow abnormality.
--
Close shut-off valve during thermo OFF?
Is a bi-zone kit installed?
Above which outdoor temperature is cooling allowed?
--
--
Can the system prepare domestic hot water?
--
What kind of DHW tank is installed?
Power saving function for outdoor unit.
--
What is the indoor unit software type?
What is the number of backup heater steps?
Is the power saving function available on the outdoor unit?
Pump operation allowed outside range.
Is the system filled with glycol ?
--
--
--
Which type of unit is installed?
Which type of compressor is installed?
Is a demand PCB connected?
Is the pump allowed to run if prefer. kWh rate PS is cut?
Is a solar kit connected?
Is an external kWh meter used for power measurement?
Is an external kWh meter used for power measurement?
--
--
Contact type of preferential kWh rate PS installation?
Which type of DHW pump is installed?
Leaving water temperature compensation around 0°C.
--
--
(*1) *6V_(*2) *9W_
(*3) ETB*_(*4) ETV*_
(*5) *X*_(*6) *H*
(#) Only applicable in Swedish language. 4P586458-1 - 2019.07