manualshive.com logo in svg

Daikin AKZ149, Инструкция по эксплуатации

Поделиться
Скачать
Daikin AKZ149 Скачать руководство пользователя страница 44

42

EC DECLARATION OF 

EC DECLARATION OF 

INCORPORATION OF PARTLY 

INCORPORATION OF PARTLY 

COMPLETED MACHINERY

COMPLETED MACHINERY

[01]  DAIKIN INDUSTRIES,LTD

1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan

[02] Technical Documentation is obtained by the following authorized.

Authorized representative

Sauer Bibus GmbH

Address

Lise-Meitner-Ring 13, D-89231 Neu-Ulm, Germany

[03] Hereby declares that the machinery described below:

Oil Cooling Unit AKZ 9 Series 
Models:

AKZ149-(B)C(H)(T),  AKZ149-017,020,023,024,026,027,029,030

AKZ329- (B)C(H)(T),  AKZ329-017,020,023,024,026,027,029,030 
AKZ439- (B)C(H)(T),  AKZ439-017,020,023,024,026,027,029,030 

[04] This declaration complies with the provisions of the machinery directive and the

regulations transposing it into national law, but 

the machinery described in this

certificate must not be put into service until the machinery into which it is to be incorporated
has been declared in conformity with the provisions of the Machinery and their amendments. 

Note)

This declaration becomes invalid if technical or operational modifications are introduced

without the manufacturer’s consent

[05] Also complies with the provisions  of the following European Directives:

- EMC Directive 2004/108/EC

Relevant information that should be transmitted in response to a reasoned
request by the national authorities, by the electronic method or other according
to the request.

[06] Complies with the provisions of the following harmonised standard:

- Machinery Directive: EN 378-2:2008
- EMC Directive:          EN 61000-6-4:2007

EN 55011:2007+ A2:2007, (group 1, class A)
EN 61000-6-2:2005

[07]

1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan

On 1. July. 2010 

[08]

Kenjiro

Suzuki

Quality Assurance Department  Manager

,

Oil-hydraulic Division, Yo dogawa Plant

CE compliance declaration

See the declaration of conformity below for a CE model (menu symbol: C).

PIM00318A_EN.fm  Page 42  Tuesday, October 26, 2010  12:37 PM

Содержание AKZ149

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды