Daikin AKZ149 Скачать руководство пользователя страница 10

Страница: 10 / 48

Main machine (Machining center)

Power line (3 line)

Circuit breaker

Power line (3 line)

Signal (2 line)

Main machine (Machining center)

Power line (3 line)

Main machine (Machining center)

Circuit breaker

Remote control switch

Circuit breaker

Control panel

Electric Wiring

Conduct electric wiring according to the local wiring standard.

For the power supply, be sure to use the commercial power source. If you use the inverter power source or other power source,

the product may cause burnout.

The Oil Cooling Unit (except for the “–B” model) is not equipped with a circuit breaker. A circuit breaker exclusively for the unit

should be mounted to the main machine.

For electric wiring, refer to the electric wiring diagram on the nameplate attached to the rear of the electrical equipment box cover.

Do not change the wiring in the Oil Cooling Unit. Do not touch the protection devices.

To turn ON the power supply for the Oil Cooling Unit, the following three methods are available:

When the circuit breaker for the main machine is turned ON, the Oil Cooling Unit starts operation. To stop the unit, turn
OFF the circuit breaker for the main machine.

Directly starting/stopping the Oil Cooling Unit with the main machine power supply

Starting/stopping the Oil Cooling Unit

When the remote control switch is turned ON, the Oil Cooling Unit starts operation. To stop the unit, turn OFF the remote
control switch.

Starting/stopping the Oil Cooling Unit with the remote control contact (see page )

If you keep pressing the and keys for at least 5 seconds in the “operation lock” mode, the Oil Cooling Unit starts

operation according to preset conditions. If you keep pressing the and keys for at least 5 seconds during

operation, “Loc” blinks on the data display, and the Oil Cooling Unit will be stopped (locked).

Starting/stopping the Oil Cooling Unit with the control panel

Installation

ocedure

PIM00318A_EN.fm Page 8 Tuesday, October 26, 2010 12:37 PM

Содержание AKZ149

















































Результаты поиска

Содержание AKZ149

Отзывы:

Бренды по названию

Популярные бренды

Daikin AKZ149, Инструкция по эксплуатации

Результаты поиска

Содержание AKZ149

Отзывы:

Бренды по названию

Популярные бренды