Instruction
SiBE12-933_A
142
Operation Manual
2.2.8 ECONO Operation
ECONO Operation
ECONO operation is a function which enables efficient
operation by limiting the maximum power consumption
value.
This function is useful for cases in which attention
should be paid to ensure a circuit breaker will not trip
when the product runs alongside other appliances.
To start ECONO operation
1. Press “ECONO button”.
• “
” is displayed on the LCD.
To cancel ECONO
operation
2. Press “ECONO button” again.
• “
” disappears from the LCD.
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO mode
vary with the connecting outdoor unit.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the OFF button causes the
setting to be canceled, and the “
” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption
of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
Running current and
power consumption
Maximum during
normal operation
Maximum during
ECONO Mode
Normal
operation
ECONO
Mode
Time
From start up until set
temperature is reached
1, 2