SDLC-207-104
13
4.2 Each display mode and operation
Shift in each mode
A display mode shifts to each mode by those with four type, and the following switch operations.
UP
Power supply
①
Measurement mode
② Set value
display mode
③ Set value change mode
If key switch operation is not performed for
30 seconds in a
set value display
mode, it
shifts to measurement mode.
MODE
Push key
UP
MODE
It pushes for 3 seconds simultaneously.
④ Setting error
display
ERROR
Y
UP
MODE
It pushes for 3 seconds
simultaneously.
ENT
Key
Push
N
MODE
Push key
MODE
It pushes for 3 seconds
simultaneously.
① Measurement mode
Measurement value, maximum value, and minimum value are displayed.
② Set value display mode
A setting item is displayed in order and the check of set value can be performed.
Change of set value cannot be performed.
③ Set value change mode
A setting item is displayed in order and change of set value can be performed.
Please perform the check of set value with a set value display mode.
④ Setting error display
An error code is displayed after setting change in set value change mode at the case of combination
error occurrence.
№
Contents of error
Measures
ERROR 0 Scaling combination error
In order that it may become MAX＞MIN, it sets up again.
ERROR 1 COMP1 setting range outside error
In order that the measurement display range may become
-25 to +125％, it sets up again.
ERROR 2 COMP2 setting range outside error
ERROR 3 COMP3 setting range outside error
ERROR 4 COMP4 setting range outside error
4.3 Measurement mode
It becomes measurement mode in after the power supply. Whenever it pushes the UP key, a display changes.
An measurement value display, maximum value display, and minimum value display can be checked.
UP
UP
UP
UP
ENT
ENT
UP
Measurement value display
Reset by push 3
seconds of ENT key
Reset by push 3
seconds of ENT key
Reset of minimum
value display
Measurement value
Unit
5 0 . 0
%
Maximum value display
+ P E A K
1 0 0 . 0
Reset of maximum
value display
- P E A K
5 0 . 0
Minimum value display
- P E A K
2 0 . 0
+ P E A K
5 0 . 0
● Explanation of a key switch
Mode (Measurement
set value display) change
Reset of maximum value and minimum value.
Display change
Not use
< Notes of maximum value and minimum value >
After set value change, please reset a maximum value
display and a minimum value display.
