Daihen Welbee WB-A350P, Руководство пользователя

Страница: 119 / 150

7-11
Chapter 7 Administrator F
unctions
D
ATA
B
ACKUP
(U
TILIZATION OF DATA
)
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
The internal function setting data will be output below the JOB Nos. (Registration Nos.)
T I P S
• It is not possible to separately save the welding condition data recorded in memory and the
internal function setting data. Both of the data will always be written in the
"DAIHEN_OTC_WELDING_PARAMETER.CSV" file.
• When importing the backup data to the welding power source, both or either of the data
above can be imported at one time.
"ALL": Welding condition data recorded in Internal function setting data
"1": Welding condition data recorded in memory
"2": Internal function setting data
7.3.2 Simplified data log function
The welding status can be checked on a computer by sampling the data during welding and backing
them up in the USB memory. Only three of the following data can be sampled.
S syn_s1_dia
Welding setting
guide
S1: Electrode
diameter
1 (
ƕ
) AQ TsCrickIset
TS click current
adjustment
0/1 (OFF/
ON)
T syn_s2_mtrl
Welding setting
guide
S2: Material
- AR CriIsetStep1
Current increase/
decrease
value by single-
clicking
0.1 (A) (*4)
U syn_s3_seam
Welding setting
guide
S3: Joint
- AS CriIsetStep2
Current increase/
decrease
value by double-
clicking
0.1 (A) (*4)
V syn_s4_thick
Welding setting
guide
S4: Plate thickness
3/64 (1)
[in. (mm)]
AT ModeTblNo Welding table No. (*3)
W syn_prf_tim
Welding setting
guide
Pre-flow time
0.1 (s) AU chksum Checksum
Checksum
data
X syn_pre_iset
Welding setting
guide
Initial current
1 (A) (*4)
*1: Crater sequence and other information is recorded.
*2: Process information is recorded.
*3: Information of welding parameter table is recorded.
*4: Displays the value in the unit of 0.1 A in case of less than 10 A.
*5: Displays the value in the unit of 0.1 Hz in case of less than 10 Hz.
• Welding current set value • Welding current actual value • Welding voltage actual value
Column Item Description Unit Column Item Description Unit
Function setting data