DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Digital Rotary Evaporator 11/55
7.
Assemble the connection portion to the Condenser, after installing the device being
equipped with a sealing.
Insert Condenser Locknut (5) into Glass Condenser (2) of assembly components so that the
assembled portion is facing the outside as shown in Figure.
8.
Install the Circlip (6) of assembly components in the inside of Locknut, after mounting the
Locknut in the Condenser.
Gently pull the spring so that it is fitted in the entrance of Condenser.
9.
After pulling the assembly components of the mounted Condenser to the inlet side of the
Condenser, assemble them in the left side of the front of Main Body. Install by assembling to
Main Body by turning the Condenser Locknut so that the entrance part of a previously
installed Deputy Vacuum Seal and the Condenser are in contact.
At this time, the Collecting portion of Condenser should be facing downward.
