DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Digital Rotary Evaporator 24/55
3. Product Usage
3.3 Usage Instructions
Connect the power cord of the Main Body connected with the operation of Condenser and
Rotary and also connect the power cord of Bath, and then turn ON each operation power switch
①
Rotary Speed Settings
-
Turn ON the power of Main Body after completing to assembly the product.
-
At this time, operate while slowly increasing the rotation speed after checking that the
position of Rotary Bottle is safe.
-
If turning the knob of the regulator of Main Body to clockwise, the RPM value is increased, if
adjusting the knob on the contrary to this, the RPM value is lowered.
The adjusted value of
the Knob is just applied to the operation.
-
When you want to stop the operation, set the RPM value to zero (0) by turning the Knob up
to the end of left side.
②
Heating Operation Setting of Bath
-
Install the Rotary Bottle in the proper position so that it is sunk into the Bath, fill the bath
with water and then turn on the power.
-
If pressing the SET button, display the standby status while blinking the Set Temperature
Value.
-
To press " " button, the set temperature value of Bath rises, and to press " "button,
the value drops.
Adjust the value that you want to heat, and to press SET button, the
flashing of Display is stopped and the heating operation is started and indicates the current
temperature.
Setting/Operation
Temperature
In heating operation
LED lighting
Temperature Set Button
Raising Temperature Value
Lowering Temperature Value
Setting/Operation
RPM
RPM value
control
Knob
