DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
High Performance Dry Bath Heating & Cooling
19/48
Set Mode
Upper Reading
Lower Reading
Timer
Set Time
Rest Time
Delay Timer
*d-tr
Set Time before Setting
Rest Time after Setting
Temperature
Set Temperature
Current(Present Value) Temperature
Offset
Compensated Temperature
Offset
Locking
Current(Present Value) Temperature
Rest Time
*d-tr(Delay timer mode) : indicate delay timer mode
<Table 2> LCD display for each mode
<Tabl
e 3>
LED
displa
y for
each
mode
3. Timer Mode.
●
LCD display indicate Timer Mode and Timer LED(Green) is blinking at the same time.
●
SV, the value of first line (smaller-sized digits) on LCD display, indicates set value of operation
timer and PV, the value of second line (bigger-sized digits) indicates present value of the timer.
●
Initial SV of the timer is 00:00, which means infinite time and the unit will operate
(heating or cooling) continuously once the operation start.
●
Turn the Jug Shuttle Knob such to clockwise or counterclockwise then SV and PV change
together. SV can be set in 1 minute, and the Maximum Value is 99:59(99hr 59mins).
●
After set timer SV, push Jog Shuttle knob 1 time shortly, the timer will be running.
●
When you set SV, push Jog Shuttle Knob about in 2~3 seconds, Will be save the Set Value.
and push Jog shuttle knob 1 time again, timer will be running.
●
When the unit has finished running time, the heater will be stop and a buzzer will go off.
●
If you want to go to next mode(Temperature Setting Mode), push MODE button 1 time.
Set Mode
Heating LED
Timer LED
Timer
Heating Output
Blinking
Delay Timer
Heating Output
Blinking
Temperature
Heating Output
ON(Running)/OFF(Stop)
Offset
OFF
ON(Running)/OFF(Stop)
Locking
Heating Output
ON(Running)/OFF(Stop)
