DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
High Performance Dry Bath Heating & Cooling
18/48
Operation
9
1. Preparation for Use
l
Put tubes on the block and then close the Lid(cover)
l
Connect the power cord then the Power Switch on.
2. Select Mode
High Performance Dry Bath Heating & Cooling Block
may be set to 3 individual modes by
pushing MODE button(Refer to Figure 5). The three modes are (1) Timer Mode(Set Operation
Time mode), (2) Temperature Mode(Set Temperature mode),
(3) Safety Mode(locking Mode) and the sub modes are Delay Mode(Set Delay Time Mode) and
Offset Mode(Set Offset Temp Mode). The initial mode is (1) Timer Mode(Set Operation Time
mode).
<Figure 5> Select Mode
(1)Set Operation Time
(2)Set Temperature
(3)Safety Locking
Set Delay Time
Set Offset Temp.
Power On
MODE
button
MODE
button
MODE
button
MODE
button
MODE
button
MODE button
+ Jog shuttle knob
MODE button
+ Jog shuttle knob
