Dahua NKB Скачать руководство пользователя страница 30

Страница: 30 / 65

Delete

Check the corresponding box first and then click Delete button, you can delete the

output port from the list.

Add

Click Add button, you can go to the corresponding interface.

Please check the corresponding output port and then click the Add button.

2.3.5 Remote Operation (Network Connection)

Basic operation



Keyboard lock:: It is to lock the keys and mouse. The keys, joystick and touch panel

are all null once you lock the keyboard. You need to click the unlock button to unlock

the keyboard.



Keyboard lock/unlock button: Click LOCK button first and then click the SHIFT button.



The keyboard lock operation has the highest priority in the shortcut operations.

During any operation in any interface, click the LOCK+SHIFT button, you can lock the

keyboard.

Note

The keyboard becomes locked after screen automatically turns off.



Delete: During the keyboard remote operation, ESC button have the delete function.

You can use it to remove the latest input number.

Output screen No.+MON

Select output screen

Input source No.+CAM

Select video source to output to the wall.

Input source No.+PT

Open video from one channel

0+MON

Open local preview

0+CAM

Close video source of one window

0+PT

Go to 485 control

0+DEV

Go to 232 control device

SHIFT

Full-screen

2.3.5.1 Shortcut Operation

Remote operation

You can view current selected output channel on the left pane. Here you can select

window display mode, the decoded input channel of each window and set other shortcut

ways. You can view current input information and some shortcut setups on the right pane.

2.3.5.2

Local Preview

Local preview is to decode and playback the signal from the input channel at the keyboard

local-end. You can implement other shortcut operations during the local preview process.

Please follow the steps listed below.

1) Input number 0+MON, select the local preview operation.

2) Input number i+MULT, select the window display amount. System now supports

1/4/8/9 /16-window mode.

Содержание NKB


































































Результаты поиска

Содержание NKB

Отзывы:

Похожие инструкции для NKB

Бренды по названию

Популярные бренды

Dahua NKB, Быстрый старт

Результаты поиска

Содержание NKB

Отзывы:

Похожие инструкции для NKB

Бренды по названию

Популярные бренды