Dahua ITC952-AU3F-L, Руководство пользователя

Страница: 23 / 37

User's Manual
16
the screwdriver vertically to loosen and expose the metal sheet of the circular slot.
Step 2 Insert the cable into the circular slot.
Step 3 Remove the screwdriver, and the cable installation is finished.
3.3.2 Removing the Cable
Step 1 Insert the screwdriver into the square slot corresponding to the connecting cable. Press
the screwdriver vertically to loosen and expose the metal sheet of the circular slot.
Step 2 Pull the cable out of the circular slot.
Step 3 Remove the screwdriver, and the cable is disassembled.
3.4 Installing Sun Shade
Figure 3-6 Cable connection example (2)
Table 3-1 Sunshade connection description
No. Description No. Description
1, 5 Screw 4 Washer
2 PTFE gasket 6 Sunshade
3 Pillar 7 Camera protective cover
Step 1 Remove the screws on the top of the camera protective cover.
Step 2 Fix the pillar to the top of the camera protective cover.
Step 3 Align the sunshade with the center hole of the pillar, and securely fix the sunshade with
screws.
3.5 Installing Corrugated Pipe
The corrugated pipe helps protect the cable.
Pull the cable into the corrugated pipe, and then pass the cable through the hole at the bottom of
the Camera. After the cable is properly placed, insert the corrugated pipe into the hole until it is
securely clamped.