Dahua ITC952-AU3F-L, Руководство пользователя

Страница: 22 / 37

User's Manual
15
Figure 3-4 Removing TF card
3.3 Connecting Cable
You need to use a 2.0 mm screwdriver to connect cables.
●
Avoid copper wire exposure when connecting the power cord. With 220 V power supply, copper
wire exposure might cause electric leakage, and thus bringing personal injury.
●
When removing the cable, turn off the power of the Camera first to avoid leakage. This helps
prevent personal injury.
●
To ensure the Camera is properly grounded and improve device reliability, make sure that:
①
The device port is connected to the PE (earth wire) of the protective cover.
②
The PE is
connected to the ground.
●
The picture is for reference only, and might differ from the actual device cable.
Figure 3-5 Cable connection example (1)
3.3.1 Installing the Cable
Step 1 Insert the screwdriver into the square slot corresponding to the connecting cable. Press