Dahua IPC-HFW2100N Series Скачать руководство пользователя страница 16

Страница: 16 / 94

Important Safeguards and Warnings

᧪

Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated 12V DC in the IEC60950-1.This series product supports PoE too.

Please note:

Do not connect these two power supplying sources to the device at the same time; it may result

in device damage!

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

We are not liable for any problems caused by unauthorized modification or attempted repair.

᧪

Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

᧪

Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

᧪

Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

᧪

Environment

This series IP camera should be installed in a cool, dry place away from direct sunlight, inflammable,

explosive substances and etc.

Please keep it away from the electromagnetic radiation object and environment.

Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

Otherwise it may result in CCD (CMOS) optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

Thunder-proof device is recommended to be adopted to better prevent thunder.

The grounding studs of the product are recommended to be grounded to further enhance the reliability

of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

Содержание IPC-HFW2100N Series































































































Результаты поиска

Содержание IPC-HFW2100N Series

Отзывы:

Похожие инструкции для IPC-HFW2100N Series

Бренды по названию

Популярные бренды

Dahua IPC-HFW2100N Series, Быстрый старт

Результаты поиска

Содержание IPC-HFW2100N Series

Отзывы:

Похожие инструкции для IPC-HFW2100N Series

Бренды по названию

Популярные бренды