12
Contrast
It is to adjust monitor window contrast. The value ranges from 0
to 100. The default value is 50.
The larger the number, the higher the contrast is. You can use
this function when the whole video bright is OK but the contrast
is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may
lack brightness while the bright section may over exposure .The
recommended value ranges from 40 to 60.
Hue
It is to adjust monitor window hue. The value ranges from 0 to
100. The default value is 50.
The input value will adjust the hue but has no effect on the
general brightness of the whole video. Such as turn the red
color to the blue color. There is a default value according to the
sensitization of the sensor. Usually you do not need to do some
major setup. The recommended value ranges from 40 to 60.
Saturation
It is to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50.
The larger the number, the strong the color is. This value has
no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white
balance is not accurate. Please note the video may not be
attractive if the value is too low. The recommended value
ranges from 40 to 60.
Gain Mode
Gain Adjust
There are two options: manual/auto.
The gain adjust is to set the gain value. The default value may
vary due to different device models. The smaller the value, the
low the noise. But the brightness is also too low in the dark
environments. It can enhance the video brightness if the value
is high. But the video noise may become too clear.
Exposure Mode There are two modes: Auto exposure (AE) and Manual
exposure (ME).
There are several values for the manual exposure mode. You
can select from the dropdown list, It support the long exposure.
It supports customized setup too. The device can auto exposure
according to the exposure time you set here. The value ranges
from 0.1 to 80ms. The exposure time is fixed if the max and min
value are the same.
Customized value: System can auto exposure according to the
value you set here. The value ranges from 0.1 to 80ms.
Содержание IPC-HFW2100N Series
